TPS61162YFFR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, DSBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS61162 |
| Number of Outputs | 2 |
| Max Supply Voltage | 6.5V |
| Output Current | 30mA |
| Max Supply Current | 2mA |
| Quiescent Current | 1mA |
| Max Output Voltage | 27V |
| Voltage - Output | 2.7V~27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 6.5V |
| Output Current per Channel | 1.5A |
| Min Output Voltage | 2.7V |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 1.2MHz |
| Nominal Input Voltage (DC) | 3.6V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61162YFFR Overview
In order to save board space, the led driver uses the 9-UFBGA, DSBGA package. In LED drivers, the outputs are all set to 2.As a mounting method, Surface Mount is used.This emerges as a DC DC Regulator with high efficiency and reliability.When the temperature is -40°C~85°C TA, it can work normally.It provides considerable benefits for Backlight.It operates with 9 terminations.Its configuration is based on 9 pins.It's mounted in Surface Mount.Under the base part number TPS61162, you'll find this LED driver.There is no problem with the voltage of 6.5V.The device has a voltage output of 2.7V~27V volts.Additionally, it can be classified as Display Drivers based on its characteristics.The minimal input voltage is 2.7V.When the maximum supply current is allowed, the value reaches 6.5V.As long as the maximum supply current is under 2mA, it can deliver high efficiency.There is no current that can be supplied to the load.It's possible for this electronic component to fully function when the switching frequency is maintained at 1.2MHz.No external factors cause 1mA current to be consumed.Ideally, the output voltage should not exceed 27V.2.7V is the minimal voltage it outputs.
TPS61162YFFR Features
Available in the 9-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.2MHz
TPS61162YFFR Applications
There are a lot of Texas Instruments TPS61162YFFR LED Driver ICs applications.
- Panel lighting
- Sports Facility Lighting
- Stage and Studio lighting
- Down lighting
- OLED power supply for portable equipment
- Amusement Machines
- Museum lighting
- Gallery lighting
- Portable lighting
- Stage Lighting and Signage