TPS40180RGET
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40180 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Control Features | Current Limit, Frequency Control, Phase Control, Power Good, Soft Start |
| Max Output Voltage | 5.8V |
| Topology | Buck |
| Min Input Voltage | 2V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz~1MHz |
| Max Input Voltage | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 700mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 87.5% |
| Clock Sync | No |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
TPS40180RGET Overview
With its 24-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 4.5V~15V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~105°C TA dc switcher. With this switching controller, you can switch at 150kHz~1MHz. dc dc regulator can be generalized using Surface Mount. The dcdc regulator features Current Limit, Frequency Control, Phase Control, Power Good, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. The 24 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. TPS40180 can be used to locate other relevant dc to dc converter ics. There are only 24 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 5.8V. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. DC regulator has a maximum frequency of 1MHz. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.8V. A circuit should contain 40V in order to ensure the voltage regulator dc to dc runs safely and reliably. Since the dc switcher's maximum input voltage is 40V, the voltage must be regulated accordingly. Voltage 2V is needed for the supply. There will be 25A current output from the dc switcher above 25A. At its maximum, the switching converter can output 5.8V volts. Lowest voltage output of the voltage controller must be greater than 700mV.
TPS40180RGET Features
Transistor Driver Outputs
Switching Frequency: 150kHz~1MHz
Current Limit, Frequency Control, Phase Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.8V
TPS40180RGET Applications
There are a lot of Texas Instruments TPS40180RGET DC to DC converter applications.
- Lathes
- Wide-range voltage regulation circuits
- Hydro power
- Constant current circuits
- Injection molding machinery
- USB circuits
- Digital video recorders
- Correction machines
- Boring machines
- Smoke exhaust equipment