TPS40170QRGYRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40170 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.2V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 60V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~60V |
| Quiescent Current | 4.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 660kHz |
| Max Duty Cycle | 95 % |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40170QRGYRQ1 Overview
It comes in a 20-VFQFN Exposed Pad package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 4.5V~60V and has a 4.5V~60V supply voltage. Qualified to work in a -40°C~125°C TJ dc switcher. It can switch at 100kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at QUAD. A variety of dc switching's functions can be performed on 20 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS40170". There are only 20 pins on switching converter. Input voltage of dc dc voltage regulator must be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 5.2V. In most cases, the output current of the dc dc regulator will be 6A, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 95 % duty cycle during power-ups and power-downs to ensure reliability. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. It is estimated that this dc regulatorhas a maximum frequency of 660kHz. It is suggested that users apply 60V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. Dormant dc switchings use 4.5mA.
TPS40170QRGYRQ1 Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
TPS40170QRGYRQ1 Applications
There are a lot of Texas Instruments TPS40170QRGYRQ1 DC to DC converter applications.
- Grinders
- USB circuits
- Smoke exhaust equipment
- Imported equipment
- Adjustable voltage or current linear circuits
- Handheld GPS
- Household control circuits
- Plate bending machines
- Packaging
- Direct power supply system