TPS3106E16DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.6V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3106E16 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 400mV |
| Operating Supply Current | 1.2μA |
| Power Dissipation | 437mW |
| Max Supply Current | 27μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1.2μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 65ms Minimum |
| Min Reset Threshold Voltage | 1.512V |
| Max Reset Threshold Voltage | 1.534V |
| Threshold Voltage | +1.521V |
| Undervoltage Threshold | 1.521V |
| Overvoltage Threshold | 1.534V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS3106E16DBVRG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. There are SOT-23-6 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.6V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 6. Power managment ic pin count is 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 400mV, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 3.3V volts in this PMIC. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 1.2μA. You can always use TPS3106E16, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 27μA.
TPS3106E16DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3106E16DBVRG4 Applications
There are a lot of Texas Instruments TPS3106E16DBVRG4 Voltage Supervisors applications.
- Stable power system
- Linux and server computing
- emergency room
- Transformer load monitoring equipment
- Display equipment
- Sensitive sensors
- Automotive power systems
- DC stabilized power supply module
- Power distribution systems of CCU
- Insulation fault location system