TPS2HB50BQPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13.5V |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 6V |
| Current - Output (Max) | 18A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 2:1 |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Turn On Time | 145 µs |
| Output Peak Current Limit-Nom | 27A |
| Rds On (Typ) | 50m Ω |
| Turn Off Time | 147 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
TPS2HB50BQPWPRQ1 Overview
This file is included in package 16-PowerTSSOP (0.173, 4.40mm Width).The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~125°C TA for reliable performance.By default, it is set to output 2.It uses a supply voltage of 3V~28V to operate.Voltage output is N-Channel volts at maximum.A total of 16 terminations can be found in it.Currently, the lighting driver has a total of 2 functions.There is a maximum output of 18AV from the LED driver.It is possible to obtain high efficiency with a supply voltage of 13.5V.It belongs to the Automotive, AEC-Q100 series.In this LED driver, the maximum supply voltage is configured to be 18V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.It has a BUFFER OR INVERTER BASED PERIPHERAL DRIVER type of interface with the lighting driver.
TPS2HB50BQPWPRQ1 Features
Supplied from 13.5V
TPS2HB50BQPWPRQ1 Applications
There are a lot of Texas Instruments TPS2HB50BQPWPRQ1 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Set-top-box
- Solid State Drivers
- HDD, SSD
- PC Cards
- Portable Music Players
- PC Card Hot Swap
- Telecom and Network Systems