TPS28225TDRBRQ1
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS28225 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Element Configuration | Single |
| Nominal Supply Current | 500μA |
| Output Current | 6A |
| Propagation Delay | 14 ns |
| Input Type | Non-Inverting |
| Output Characteristics | 3-STATE |
| Rise Time | 10ns |
| Fall Time (Typ) | 5 ns |
| Turn-Off Delay Time | 250 ns |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| High Side Voltage - Max (Bootstrap) | 33V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~8.8V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
TPS28225TDRBRQ1 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-VDFN Exposed Pad package.A package of Tape & Reel (TR) has been used.This configuration includes 2 drivers.It's mounted on the way to Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~8.8V.This device is designed with a N-Channel MOSFET gate type.-40°C~125°C TJ is the allowed temperature range for this device.Non-Inverting is used as the input type.Mosfet driver is based on 8 terminations.The base part number TPS28225 refers to a number of related parts.In this case, Surface Mount indicates how the device is mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.The device is specifically designed to function with a supply voltage of 7.2V V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 2A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The component has 8 pins.Maximum (Bootstrap) voltage can be up to 33V.Mosfet gate drivers supports a current output of 6A.The gate driver is part of the Automotive, AEC-Q100 series.A total of 1 channels are configured for operation.
TPS28225TDRBRQ1 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 33V
Operating with the supply voltage of Automotive, AEC-Q100
TPS28225TDRBRQ1 Applications
There are a lot of Texas Instruments TPS28225TDRBRQ1 gate drivers applications.
- Motor Control
- Head-up and Head mounted displays
- Power factor correction (PFC) circuits
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High current laser/LED systems
- Telecom switch mode power supplies
- High-speed communications
- Industrial Motor Inverter - Power Tools, Robotics
- Smart Phones
- General Purpose 3-Phase Inverter