TPS2557DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 35mOhm |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2557 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 2μA |
| Output Configuration | High Side |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 120μA |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Turn-Off Delay Time | 6 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 22m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2557DRBR Description
TPS255x distribution switches are suitable for applications that require precise current limiting or encounter heavy capacitive loads and short circuits. These devices provide a programmable current limiting threshold between 500 mA and 5 A (typical) through external resistors. The rise and fall time of the power switch is controlled to minimize the current surge during turning and turn-off. When the output load exceeds the current limiting threshold, the TPS255x device will switch to constant current mode, thus limiting the output current to a safe level. Under the conditions of overcurrent and overheating, the fault logic output is low.
TPS2557DRBR Features
? Meets USB Current-Limiting Requirements
? Adjustable Current Limit, 500 mA to 5 A (Typical)
? ±6.5% Current-Limit Accuracy at 4.5 A
? Fast Overcurrent Response: 3.5-μs (Typical)
? 22-mΩ High-Side MOSFET
? Operating Voltage: 2.5 V to 6.5 V
? 2-μA Maximum Standby Supply Current
? Built-in Soft Start
? 15-kV and 8-kV System-Level ESD Capable
? UL Listed: File No. E169910 and CB IEC60950-1-
am2 ed2.0
TPS2557DRBR Applications
? USB Ports and Hubs
? Digital TVs
? Set-Top Boxes
? VOIP Phones