TPS2553QDBVRQ1
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2553 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 6.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.5A |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
Description
The TPS2553QDBVRQ1 power-distribution switch is designed for applications that need precise current limiting or that include significant capacitive loads and short circuits. It can deliver a continuous load current of up to 1.5 A. An external resistor can be used to program a current-limit threshold between 75 mA and 1.7 A (typical). At the higher current-limit levels, current-limit accuracy of up to ±6% can be reached. To minimize current surges during turn on and off, the rise and fall times of the power switch are managed.
When the output load exceeds the current-limit threshold, the TPS2553QDBVRQ1 device uses a constant-current mode to limit the output current to a safe level. To protect devices on the input side of the switch, an inbuilt reverse-voltage comparator disables the power switch when the output voltage is driven higher than the input voltage. During overcurrent and reverse-voltage circumstances, the FAULT output asserts low.
Features
? Reverse Input-Output Voltage Protection
? Operating Range: 2.5 V to 6.5 V
? Built-in Soft-Start
? 15 kV ESD Protection per IEC 61000-4-2 (With External Capacitance)
? See the TI Switch Portfolio
? Adjustable Current-Limit, 75 mA–1300 mA (Typical)
? Constant-Current Version
? Fast Overcurrent Response - 2-μs (Typical)
? 85-m? High-Side MOSFET
? Qualified for Automotive Applications
? AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C3B
? Up to 1.5-A Maximum Load Current
? ±6% Current-Limit Accuracy at 1.7 A (Typical)
? Meets Universal Serial Bus (USB) Current Limiting Requirements
Applications
? Power Distribution and Switching
? Precision Current Limiting
? USB Ports and Hubs
? Automotive ECU Supply Rail Power Distribution and Switching
? Automotive ECU Supply Rail Precision Current Limiting