TPS2553DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 1.33W |
| Max Power Dissipation | 1.33W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2553 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Voltage | 6.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.33W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2553DRVT Overview
It is package in Tape & Reel (TR) case.There is a package for it in the 6-WDFN Exposed Pad package.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It is a member of the TPS2553 family.A total of 6 terminations have been recorded.The 6 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 1.2A in order to meet the operation criteria.A supply voltage of 5V leads to high efficiency.As a result, it has a total of 6 pins.There is 100mOhm resistance on the LED driver.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.Input voltage is limited to 6.5V volts.There is a minimum input voltage of 2.5V volts.
TPS2553DRVT Features
Supplied from 5V
Resistance of 100mOhm
1 channels
TPS2553DRVT Applications
There are a lot of Texas Instruments TPS2553DRVT Power Switches ICs applications.
- Various applications equipped with buttons
- Smartphone and PDA
- HDD and SSD
- Low Voltage I/O System Power
- USB Protection
- Storage (HDDs, SSDs)
- Portable Music Players
- USB Power Distribution
- USB Power Distribution
- Notebook PC