TPS2553DBVR-1
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS2553 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2553DBVR-1 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package SOT-23-6.The lighting driver is mounted in the Surface Mount position.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.I believe it belongs to the TPS2553 family.As a result, there are 6 terminations.The 6 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.The supply voltage can be 5V for high efficiency.6 pins are connected to it in total.It has a resistance of 85mOhm.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.The maximum input voltage is 6.5V volts.A minimum input voltage of 2.5V volts is required for this LED driver.
TPS2553DBVR-1 Features
Supplied from 5V
Resistance of 85mOhm
1 channels
TPS2553DBVR-1 Applications
There are a lot of Texas Instruments TPS2553DBVR-1 Power Switches ICs applications.
- Telecom and Network Systems
- Notebook PC
- Portable Video Game Players
- Storage (HDDs, SSDs)
- Portable GPS
- Wireless/Networking Cards
- Mobile Communication Devices
- Notebook and Tablet Computers
- PDAs
- Portable/Handheld Devices