TPS2551DBVTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 625mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS2551 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2551DBVTG4 Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package SOT-23-6.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 1.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.It is equipped with Slew Rate Controlled features.It comes under the family of TPS2551.In total, there are 6 terminations.6 pins are used for operation.It is important to note that the LED driving board has 1 functions.The lighting driver's maximum output is 1.1AV.The supply voltage can be 3.3V for high efficiency.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 6 pins.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.A maximum input voltage of 6.5V volts can be applied to it.Input voltage must be at least 2.5V volts.
TPS2551DBVTG4 Features
Supplied from 3.3V
1 channels
TPS2551DBVTG4 Applications
There are a lot of Texas Instruments TPS2551DBVTG4 Power Switches ICs applications.
- Low Voltage I/O System Power
- Set-top-box
- Portable GPS
- Hot Swaps
- Portable GPS Device
- PC Cards
- Portable Music Players
- Notebook PC
- USB Ports/Hubs
- Wearable Devices