TPS2412DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2412 |
| Pin Count | 8 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.25mA |
| Power Dissipation | 410mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Supply Current-Max (Isup) | 6mA |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2412DRG4 Overview
This item comes in a 8-SOIC (0.154, 3.90mm Width) case. In Tape & Reel (TR) cases, it is convenient to pack the part. There is a Surface Mount-axis mounted on the part. We give it a voltage of 3V~16.5V. It is essential that the minimal operating temperature of this component is not -40°C~85°C. The component connected to N+1 Power Supplies, High Availability is a good match for this component. A N+1 ORing Controller device is categorized as such. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. The part comes with 8 terminations. 8 pins are used in the design of this product. Using TPS2412 as a basis, the part is constructed. Performance is delivered through 5V. A maximum reflow temperature of this part is used if 260 is to be run. The part is from Power Management Circuits family. In this part, there are 8 pins. Voltage supply (Vsup) for this part should not be less than 3V. A supply current of 4.25mA is used to operate the device when it is in operation. Current supplies (Isup) should run under 6mA. Chips can be used with input voltages of more than 16.5V volts. Input voltages less than 800mV Volts are suitable for this chip, as long as the voltage input is not excessive. The output current that can be delivered to the component is determined by the 290μA value. A quiescent current is used at 1.2mA for this purpose.
TPS2412DRG4 Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2412DRG4 Applications
There are a lot of Texas Instruments TPS2412DRG4 Ideal Diode controller applications.
- Cell phones
- Factory automation and control - PLC digital output modules
- Electronic point of sale
- Electricity meters
- Power Tools
- USB HUBs
- Active ORing for redundant power supplies
- Camera ECU
- Active OR-ing of Redundant (N+1) Power Supplies
- Industrial motor drives