TPS2410PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2410 |
| Pin Count | 14 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Power Dissipation | 404mW |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2410PWRG4 Overview
The case is 14-TSSOP (0.173, 4.40mm Width)-shaped. Tape & Reel (TR) cases are suitable for packing the part. Surface Mount is the way the part is mounted. It is given a voltage of 3V~16.5V. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. The component connected in N+1 Power Supplies, High Availability is suitable for this component. The device is categorized as N+1 ORing Controller. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. In this part, there are 14 terminations. As you can see, it is designed with 14 pins. It is based on TPS2410. In order to deliver its performance, it is powered by 5V. This part's peak reflow temperature is utilized to run 260. As far as I know, the part belongs to the Power Management Circuits family. There are 14 pins in the part. It is important that Vsup for this part does not fall below 3V. In order for it to operate, it uses a supply current called 4.25mA. If the input voltage is greater than 16.5VV, this chip is capable of being used. The chip can be used with an input voltage of less than 800mV V. A maximum output voltage of 10.2V is achieved by it. In 1.2mA, quiescent current is used.
TPS2410PWRG4 Features
in a 14-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260
TPS2410PWRG4 Applications
There are a lot of Texas Instruments TPS2410PWRG4 Ideal Diode controller applications.
- PDAs
- ADAS domain controller
- Electricity meters
- Active OR-ing of Redundant (N+1) Power Supplies
- Digital Cameras
- PCs
- Power Tools
- Automotive ADAS systems - camera
- Industrial motor drives
- Alternator