TPS22965TDSGTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22965 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 0.8V~5.5V |
| Quiescent Current | 50μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Rds On (Typ) | 16m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE SINK |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22965TDSGTQ1 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 8-WFDFN Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.It is best to set the temperature to -40°C~105°C TA to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on 0.8V~5.5V supply voltage.The maximum output voltage of this LED driver is N-Channel volts.The lighting driver has Load Discharge, Slew Rate Controlled features.The TPS22965 family consists of this type.It consists of 8 terminations in total.In order to operate, the 8 pins are used.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 4A.Using a voltage of 5V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.A component of this type is included in the Automotive, AEC-Q100 series.The maximum supply voltage is set to 5.5V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.5V.
TPS22965TDSGTQ1 Features
Supplied from 5V
TPS22965TDSGTQ1 Applications
There are a lot of Texas Instruments TPS22965TDSGTQ1 Power Switches ICs applications.
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Set-Top Boxes
- USB Power Distribution
- Portable Video Game Players
- Various applications equipped with buttons
- Hot-Swap Systems
- HDD, SSD
- Hot Swap
- Storage (HDDs, SSDs)