TPS22946YZPR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 400mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 810.63mW |
| Max Power Dissipation | 324.25mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22946 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 100nA |
| Current | -100mA |
| Output Configuration | High Side |
| Power Dissipation | 810.63mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 125 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 115 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 300m Ω |
| Drain to Source Resistance | 400mOhm |
| Height | 500μm |
| Length | 1.5mm |
| Width | 900μm |
| Thickness | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22946YZPR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 6-XFBGA, DSBGA.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.A maximum voltage of P-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the TPS22946 family.A total of 6 terminations have been found in it.The 6 pins are used for the operation of the system.It has 1 functions.The supply voltage can be 1.8V for high efficiency.The LED driving board is equipped with a total of 6 pins.It has 400mOhm resistance.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 1.62V volts for this LED driver.5μA is the maximum current required to operate it.
TPS22946YZPR Features
Supplied from 1.8V
Resistance of 400mOhm
1 channels
TPS22946YZPR Applications
There are a lot of Texas Instruments TPS22946YZPR Power Switches ICs applications.
- USB Power Distribution
- Wearable Devices
- Various applications equipped with buttons
- PDAs
- Portable Video Game Players
- Notebook and Tablet Computers
- Portable GPS
- Storage Drives
- Handheld Devices
- PC Card Hot Swap