TPS22930AYZVT
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Resistance | 49mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22930 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | -200mA |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 2.1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7.4 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 9.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.4V~5.5V |
| Fault Protection | Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 35m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22930AYZVT Overview
A Tape & Reel (TR) is used to package it.Package 4-XFBGA, DSBGA contains it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.It has a total of Slew Rate Controlled features.It belongs to the family TPS22930.In order to operate, 4 pins are used.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 49mOhm ohms.The output current is set to 2A in this case.In total, there are 1 channels available.Electrical components classified as General Purpose are included in this category.
TPS22930AYZVT Features
Resistance of 49mOhm
1 channels
TPS22930AYZVT Applications
There are a lot of Texas Instruments TPS22930AYZVT Power Switches ICs applications.
- PC Cards
- Portable Music Players
- HDD and SSD
- Wireless/Networking Cards
- USB Power Distribution
- Hard Disk Drives
- Notebook and Tablet Computers
- USB3.1 Power Delivery
- Hot Swap
- Hot-Swap Systems