TPS22930AYZVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 74mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22930 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 2.1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4.8 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 6.3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.4V~5.5V |
| Fault Protection | Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 35m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22930AYZVR Overview
Cut Tape (CT) is the way it's packaged.Package 4-XFBGA, DSBGA contains it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The lighting driver has Slew Rate Controlled features.It comes under the family of TPS22930.In order to operate, 4 pins are used.Surface Mount is mounted in the way.There is 74mOhm resistance on the LED driver.The output current is set to 2A in this case.We offer 1 channels in total.In order to maximize efficiency, the supply voltage should be set to 5.5V.There is a classification for this electrical component of General Purpose.
TPS22930AYZVR Features
Resistance of 74mOhm
1 channels
TPS22930AYZVR Applications
There are a lot of Texas Instruments TPS22930AYZVR Power Switches ICs applications.
- Hot Swaps
- PC Cards
- USB Power Distribution
- USB3.1 Power Delivery
- Portable GPS
- Various applications equipped with buttons
- Solid-State Drives
- Smartphone and PDA
- Set-Top Boxes
- Storage Drives