TPS22925CNYPHT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 13.1mOhm |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22925 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.65V~3.6V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 9.2m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE SINK |
| Height | 400μm |
| Length | 0m |
| Width | 0m |
| Thickness | 200μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22925CNYPHT Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in 6-XFBGA, DSBGA.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~105°C TA for reliable operation.As a default, the output is set to 1.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Slew Rate Controlled features is available.I believe it belongs to the TPS22925 family.As a result, there are 6 terminations.For operation, 6 pins are used.The LED driver has 1 functions.This results in the maximum output current dropping to 3A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 1V.Currently, the LED driving board has a resistance of 13.1mOhm ohms.
TPS22925CNYPHT Features
Supplied from 1V
Resistance of 13.1mOhm
TPS22925CNYPHT Applications
There are a lot of Texas Instruments TPS22925CNYPHT Power Switches ICs applications.
- Various applications equipped with buttons
- HDD, SSD
- Set-Top Boxes
- Portable/Handheld Devices
- Portable GPS
- Portable Devices
- Wireless Headsets
- USB3.1 Power Delivery
- Handheld Devices
- Portable GPS Device