TPS22912CYZVT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22912 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 2μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.513 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 17.4 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.4V~5.5V |
| Fault Protection | Reverse Current, UVLO |
| Rds On (Typ) | 60m Ω |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22912CYZVT Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package 4-XFBGA, DSBGA.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.It has a total of Slew Rate Controlled features.The TPS22912 family contains this object.It has a total of 4 terminations.It is necessary to use the 4 pins in order to operate the LED driver.It consists of 1 functions.A supply voltage of 1.5V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.It has 150mOhm resistance.This case results in a 2A output current.The maximum supply voltage is set to 5.5V.
TPS22912CYZVT Features
Supplied from 1.5V
Resistance of 150mOhm
TPS22912CYZVT Applications
There are a lot of Texas Instruments TPS22912CYZVT Power Switches ICs applications.
- Wearable Devices
- Low Voltage I/O System Power
- PC Card Hot Swap
- Set-top-box
- Hot Swap
- USB Power Distribution
- Set-Top Boxes
- Portable Devices
- Smart Phones, Feature Phones
- Hot Swap