TPS22908YZTR
| Parameters | |
|---|---|
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22908 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 190nA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Switching | BREAK-BEFORE-MAKE |
| Rds On (Typ) | 28.2m Ω |
| Switch-off Time-Max | 7000ns |
| Height | 625μm |
| Length | 1.25mm |
| Width | 1.25mm |
| Thickness | 480μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 32.1Ohm |
TPS22908YZTR Overview
A Digi-Reel? is used to package it.It is included with the 4-UFBGA, DSBGA package as well.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is P-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.The TPS22908 family consists of this type.There are 4 terminations in it.The 4 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.Using a voltage of 1.2V allows for high efficiency.It is mounted in the way of Surface Mount.It has a resistance of 32.1Ohm.The output current is set to 1A in this case.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 1V.In this case, the analog IC is SPST.A total of 1 channels are available for you to choose from.
TPS22908YZTR Features
Supplied from 1.2V
Resistance of 32.1Ohm
1 channels
TPS22908YZTR Applications
There are a lot of Texas Instruments TPS22908YZTR Power Switches ICs applications.
- Set-top-box
- Portable Music Players
- Various applications equipped with buttons
- Solid State Drivers
- Storage Drives
- Hot Swaps
- Wireless/Networking Cards
- USB Power Distribution
- Telecom and Network Systems
- Hot Swap