TPS22907YZTT
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 60mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 860mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22907 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Number of Channels | 1 |
| Voltage | 3.6V |
| Interface | On/Off |
| Nominal Supply Current | 50nA |
| Current | 1A |
| Output Configuration | High Side |
| Power Dissipation | 859.69mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Adjustable Threshold | NO |
| Quiescent Current | 70nA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 28 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.1V |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~3.6V |
| Rds On (Typ) | 44m Ω |
| Drain to Source Resistance | 58mOhm |
| Height | 625μm |
| Length | 1.25mm |
| Width | 1.25mm |
| Thickness | 480μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22907YZTT Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 4-UFBGA, DSBGA.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.A maximum voltage of P-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled features.It comes under the family of TPS22907.A total of 4 terminations can be found in it.The 4 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.Using a voltage of 1.2V allows for high efficiency.Surface Mount is mounted in the way.It is equipped with a total of 4 pins.The LED driver has 60mOhm resistance.This case has the output current set to 1A.In total, 1 channels are available.A maximum input voltage of 3.6V volts can be applied to it.The minimum input voltage is 1.1V volts.It operates at a maximum current of 1μA.General Purpose?is?the?classification?for?this?electrical?component.
TPS22907YZTT Features
Supplied from 1.2V
Resistance of 60mOhm
1 channels
TPS22907YZTT Applications
There are a lot of Texas Instruments TPS22907YZTT Power Switches ICs applications.
- Solid State Drivers
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- HDD, SSD
- Smartphone and PDA
- USB Power Distribution
- Storage Drives
- Gaming
- HDD and SSD
- Hard Disk Drives