TPS2228PWP
| Parameters | |
|---|---|
| Adjustable Threshold | YES |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 3:4 |
| Voltage - Load | 1.8V 3.3V 5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 97m Ω |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 72mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2228 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.83.35V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Interface | Serial |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 2 |
| Nominal Supply Current | 95μA |
| Output Configuration | High Side |
| Power Dissipation | 30.67mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
TPS2228PWP Overview
The package is in the form of a Tube.This package is included in 20-PowerTSSOP (0.173, 4.40mm Width).This LED driving board is mounted using the mounting type Surface Mount.PCMCIA Switch is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There are 4 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the TPS2228 family.The termination count is 20.The 20 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.This operation requires the maximum output current to be decreased to 1A.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.A total of 20 pins are included in this LED driver.The LED driver has 72mOhm resistance.A self-contained econtainer holding Power Management Circuits capacity contains this lighting driver.A maximum supply voltage of 3.6V is set in Vsup.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.You can select from 3 channels.1.83.35V is the power supply of the part.
TPS2228PWP Features
Supplied from 3.3V
Resistance of 72mOhm
3 channels
TPS2228PWP Applications
There are a lot of Texas Instruments TPS2228PWP Power Switches ICs applications.
- Hard Disk Drives
- USB3.1 Power Delivery
- Set-Top Boxes
- Telecom and Network Systems
- HDD, SSD
- PC Cards
- Portable Video Game Players
- USB Protection
- Portable GPS Device
- Wireless/Networking Cards