TPS2211APWPG4
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | HTSSOP EP |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE ON 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Adjustable Threshold | NO |
| Nominal Input Voltage | 13.5V |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
TPS2211APWPG4 Overview
It's included in the HTSSOP EP package.Channel 3 is currently available.In total, it has 20 terminations.A device's terminal position is DUAL.20 pins make up the entire device.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 3.3V.Operating the device requires 20 pins.As far as Power Management Circuits is concerned, this gadget is self-contained.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is stable to operate at a temperature of 85°C°C at the maximum.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.In the Vsup (maximum supply voltage) setting, 5.25V is selected.An analog IC, in this case POWER SUPPLY SUPPORT CIRCUIT, is used in this gadget.By default, output 1 is selected.Through the use of this device, ALSO OPERATE ON 5V SUPPLY can also be produced.Hot Swap has 70mOhm resistance.
TPS2211APWPG4 Features
The terminal position of 20
TPS2211APWPG4 Applications
There are a lot of Texas Instruments TPS2211APWPG4 hot swap controllers applications.
- Industrial high-side switches
- DC boost circuit
- Reverse current protection
- Automatic restart after load failure
- Redundant-array-of-independent-disk (RAID) storage
- Raid
- Automotive circuits
- Server backplane system
- Continuous monitoring of device temperature
- Short circuit protection