TPS2115PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2115 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2115PWRG4 Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included. A Tape & Reel (TR) case is a good choice for packing the part. Surface Mount is used to mount the part. An electric current of 2.8V~5.5V is applied to it. It is not allowed for this component to operate below -40°C~85°C degrees. The component connected to Handheld/Mobile Devices is a good match for this component. As far as the device classification is concerned, it falls under the Source Selector Switch category. It is possible to recognize the FET type as N-Channel. In the part there are 8 terminations that are available. As you can see, it is designed with 8 pins. The part is based on TPS2115. It is powered by 2.8V to deliver its perfomance. A maximum reflow temperature of this part is used if 260 is to be run. Run the supply current of the part at 55μA. This part is part of the Power Management Circuits family of parts. It is important to note that the part has 8 pins. Current supply (Isup) must conduct under 0.09mA. There are 1 outputs. An input voltage of more than 5.5V V can be used with the chip. There are certain situations in which the chip can be used with input voltages as low as 2.8V V. The part is capable of being delivered under 1.25A output current. There is a specific output current that can be delivered to the component, which is called 1.25A. The device can be operated with a voltage supply of 5.5V on the supply line. In order to run the part, it needs 2 inputs.
TPS2115PWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2115PWRG4 Applications
There are a lot of Texas Instruments TPS2115PWRG4 Ideal Diode controller applications.
- Alternator
- Camera ECU
- Factory automation and control - PLC digital output modules
- Industrial motor drives
- Modems
- Automotive USB hubs
- MP3 Players
- Cell phones
- Motor drives
- Reverse Polarity Protection