TPS2113PWRG4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2113 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2113PWRG4 Overview
The case comes with it. Parts should be packed in Tape & Reel (TR) cases. Surface Mount is used to mount the part. It is given a voltage of 2.8V~5.5V. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. The component connected in Handheld/Mobile Devices is suitable for this component. Device Source Selector Switch belongs to the Source Selector Switch category. N-Channel is the type of FET. The part comes with 8 terminations. It is designed with 8 pins. It is based on TPS2113. To deliver its performance, it's powered by the 2.8V platform. A maximum reflow temperature of this part is used if 260 is to be run. Run the supply current of the part at 55μA. A part from the Power Management Circuits family is what we are talking about. In this part, there are 8 pins. Current supplies (Isup) should run under 0.09mA. 1 outputs are available in the system. It is possible to use this chip with an input voltage that exceeds 5.5V volts. With an input voltage less than 2.8V V, the chip can be used. Delivery of the part is possible under 1.25A output current. There is a specific output current that can be delivered to the component, which is called 1.25A. When supplied with a voltage of 5.5V, this device will function. In order to run the part, it needs 2 inputs.
TPS2113PWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2113PWRG4 Applications
There are a lot of Texas Instruments TPS2113PWRG4 Ideal Diode controller applications.
- Automotive battery protection
- Digital Radios
- Head Unit
- MP3 Players
- Industrial motor drives
- USB HUBs
- PCs
- Power supply reverse polarity protection
- PDAs
- Cell phones