TPS2113APWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 387mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2113 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2113APWR Overview
The case comes with it. Packing the part in Tape & Reel (TR) cases is ideal. Part Surface Mount is mounted. A voltage of 2.8V~5.5V is applied to it. The minimum operating temperature of this component must not be -40°C~85°C. It is fitting for the component connected in Handheld/Mobile Devices. As far as the device classification is concerned, it falls under the Source Selector Switch category. In the case of FETs, N-Channel is recognized as the type. The part is available with 8 terminations as an option. 8 pins are used in the design of this product. As you can see, this part is based on TPS2113. Powered by 2.8V, it delivers high performance. For the purpose of running 260, this part's peak reflow temperature is utilized. It is a part from the Power Management Circuits family. It is a part that has 8 pins in it. In order for it to operate, a supply current of 55μA is used. A supply current (Isup) should be conducted under the condition 0.09mA. There are outputs that can be connected to 1. Chips can be used with input voltages of more than 5.5V volts. The chip can be used with an input voltage of less than 2.8V V. This part is capable of being delivered with an output current of 1.25A. The output current that can be delivered to the component is 1.25A. It is possible to operate this device with a supply voltage of 5.5V. For this part to run, 2 inputs are required. Max output voltage amounts to 6V. As long as the device resistance stays within the range of 84mOhm, the device is safe to use.
TPS2113APWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2113APWR Applications
There are a lot of Texas Instruments TPS2113APWR Ideal Diode controller applications.
- Power Tools
- Head Unit
- Electricity meters
- Motor drives
- Automotive infotainment systems - head unit,telematics control unit
- Active ORing for redundant power supplies
- Automotive battery protection
- AC Rectifier
- Asset tracker
- Factory automation and control - PLC digital output modules