TPS2111PWR
| Parameters | |
|---|---|
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 386.84mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2111 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Max Output Voltage | 6V |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
TPS2111PWR Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. Packing the part in Tape & Reel (TR) cases is ideal. In this case, the part is mounted in the direction of Surface Mount. There is a voltage of 2.8V~5.5V applied to it. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. The component connected to Handheld/Mobile Devices is a good match for this component. As far as the device classification is concerned, it falls under the Source Selector Switch category. There is a N-Channel type of FET. The part comes with 8 terminations. There are 8 pins on it. As you can see, this part is based on TPS2111. Performance is delivered by 2.8V. This part's peak reflow temperature is utilized to run 260. A part from the Power Management Circuits family is what we are talking about. As you can see, the part is equipped with 8 pins. For the operation of this device, an electric current of 55μA is used as the supply current. Under 0.09mA, the supply current (Isup) should flow. As part of the outputs, there is a 1 output. It can work with voltages greater than 5.5VV as an input voltage. Low input voltages of less than 2.8V volts will not damage the chip. The part can be delivered under 1.25A output current. As a result of this, 1.25A is the maximum output current that is capable of being delivered to the component. In order for the part to run, it has 2 inputs. Device resistance should be kept within the range of 84mOhm.
TPS2111PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
2 inputs
TPS2111PWR Applications
There are a lot of Texas Instruments TPS2111PWR Ideal Diode controller applications.
- Asset tracker
- Automotive infotainment systems - head unit,telematics control unit
- PCs
- AC Rectifier
- Digital Radios
- Electronic point of sale
- Reverse Polarity Protection
- Modems
- MP3 Players
- Alternator