TPS2102DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.7V~4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2102 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 4V |
| Supply Voltage-Max (Vsup) | 4V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Current - Output (Max) | 500mA 100mA |
| Output Current | 100mA |
| Adjustable Threshold | NO |
| Current - Supply | 14μA |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 4V |
| Nominal Input Voltage | 4V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2102DBVR Overview
The case is made of SC-74A, SOT-753 plastic. Parts should be packed in Tape & Reel (TR) cases. There are two ways in which this part is mounted. A voltage of 2.7V~4V is applied to it. It is essential that the minimal operating temperature of this component is not -40°C~70°C. Suitable for components connected in Handheld/Mobile Devices. As far as the device classification is concerned, it falls under the Source Selector Switch category. A N and P-Channel-type FET can be identified. A 5 termination is available on the part. There are 5 pins on it. As you can see, this part is based on TPS2102. In order to deliver its performance, it is powered by 3.3V. This part's peak reflow temperature is utilized to run 260. It is necessary to run the supply current at 14μA for the part. As far as I know, the part belongs to the Power Management Circuits family. In this part, there are 5 pins. In order to reach the maximum supply voltage, Vsup has to reach a value of 4V. Voltage can be delivered at 3.3V by it. In this case, 1 outputs are available. Parts should be mounted Surface Mount-wise. A chip can work if the output current conducts under a certain value called 500mA 100mA. It can work with voltages greater than 4VV as an input voltage. With an input voltage less than 2.7V volts, it is possible to use the chip. The output current that can be delivered to the component is determined by the 100mA value. It is possible for this device to operate when the supply voltage is 4V. In order to run the part, it needs 2 inputs.
TPS2102DBVR Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2102DBVR Applications
There are a lot of Texas Instruments TPS2102DBVR Ideal Diode controller applications.
- Head Unit
- Camera ECU
- Digital Cameras
- Cell phones
- Factory automation and control - PLC digital output modules
- PCs
- Automotive battery protection
- Modems
- Alternator
- Reverse Polarity Protection