TPS2102D
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 80.002354mg |
| Operating Temperature | -40°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 250mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 309mW |
| Voltage - Supply | 2.7V~4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2102 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 4V |
| Supply Voltage-Max (Vsup) | 4V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Current - Output (Max) | 500mA 10mA |
| Output Current | 500mA |
| Max Supply Current | 14μA |
| Adjustable Threshold | NO |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 4V |
| Nominal Input Voltage | 4V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 100mA |
| Length | 4.9mm |
| Width | 3.905mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS2102D Overview
The case is 8-SOIC (0.154, 3.90mm Width)-shaped. Parts should be packed in Tube cases. Surface Mount is used to mount the part. There is a voltage of 2.7V~4V applied to it. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~70°C. It fits the Handheld/Mobile Devices-connected component. Source Selector Switch represents the device category. As far as FET types are concerned, N and P-Channel can be recognized. 8 terminations are available in the part. There are 8 pins on the board and it is designed with them. TPS2102 is the base of this part. It is powered by 3.3V to deliver its perfomance. A maximum reflow temperature of this part is used if 260 is to be run. There is a part of the Power Management Circuits family that is used in this part. As you can see, the part is equipped with 8 pins. A maximum voltage supply (Vsup) is reached at 4V. At 3.3V, it can deliver voltage. As part of the outputs, there is a 1 output. The chip can work when the output current conducts under 500mA 10mA. An input voltage over 4V V can be used with this chip. It is possible to use the chip if the input voltage is less than 2.7V Volts. The part can be delivered under 500mA output current. The component can be delivered a current of 500mA as an output. With a supply voltage of 4V, this device can operate. A 2 input is required to run the part. Device resistance should be kept within the range of 250mOhm.
TPS2102D Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N and P-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2102D Applications
There are a lot of Texas Instruments TPS2102D Ideal Diode controller applications.
- Active ORing for redundant power supplies
- MP3 Players
- Cell phones
- Industrial motor drives
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive USB hubs
- Modems
- Electricity meters
- Automotive infotainment systems - head unit,telematics control unit
- Digital Cameras