TPS2100DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 375mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 309mW |
| Voltage - Supply | 2.7V~4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2100 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 10mA |
| Operating Supply Voltage | 4V |
| Supply Voltage-Max (Vsup) | 4V |
| Number of Channels | 2 |
| Operating Supply Current | 10μA |
| Current - Output (Max) | 500mA 10mA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 309mW |
| Output Current | 500mA |
| Adjustable Threshold | NO |
| Propagation Delay | 370 μs |
| Turn On Delay Time | 370 μs |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 4V |
| Nominal Input Voltage | 4V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2100DBVT Overview
The case comes in SC-74A, SOT-753 shape. Packing the part in Tape & Reel (TR) cases is ideal. There is a Surface Mount-axis mounted on the part. There is a voltage of 2.7V~4V applied to it. It must not be possible for this component to operate at -40°C~70°C°C as its minimum operating temperature. The component connected to Handheld/Mobile Devices is a good match for this component. Source Selector Switch is the category for the device. A N and P-Channel-type FET can be identified. The part is available with 5 terminations. There are 5 pins on the board and it is designed with them. TPS2100 is the basis for the part. Performance is delivered by 3.3V. In order to run 260, a part's peak reflow temperature is utilized. A Power Management Circuits family part is involved in the project. It is a part that has 5 pins in it. The maximal supply voltage (Vsup) reaches 4V. It operates using 10μA supply current. The 1 outputs are available for use. It is recommended to mount the part by Surface Mount. Whenever the output current is less than 500mA 10mA, the chip can operate. It is possible to use this chip with an input voltage that exceeds 4V volts. A voltage less than 2.7VV can be used to drive the chip. Under 10mA output current, the part can be delivered. This component can deliver 500mA output currents. There is no problem operating this device with a supply voltage of 4V. In order to make the part run, there are 2 inputs. Within the 375mOhm range, the device resistance should be maintained.
TPS2100DBVT Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2100DBVT Applications
There are a lot of Texas Instruments TPS2100DBVT Ideal Diode controller applications.
- Digital Cameras
- Industrial motor drives
- Industrial transport
- Automotive USB hubs
- Power Tools
- Automotive infotainment systems - head unit,telematics control unit
- Power supply reverse polarity protection
- Electricity meters
- ADAS domain controller
- Automotive ADAS systems - camera