TPS2095DG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2095 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 300mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
TPS2095DG4 Overview
It is packaged in the manner of a Tube.This package is included in 16-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to 0°C~125°C TJ.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.It has a total of Status Flag features.It belongs to the family TPS2095.It contains 16 terminations.16 pins are used for operation.The LED driver has 4 functions.The maximum output current drops to 250mA in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.It is equipped with a total of 16 pins.80mOhm resistance is present in the lighting driver.This results in a 250mA output current.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The power supply of the part is 3/5V.Optimal efficiency requires a voltage of 5.5V.Its maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.There is a maximum current requirement of 85μA for its operation.We have available 4 inputs.
TPS2095DG4 Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2095DG4 Applications
There are a lot of Texas Instruments TPS2095DG4 Power Switches ICs applications.
- Portable Devices
- Solid State Drivers
- Set-Top Boxes
- Wireless/Networking Cards
- Storage Drives
- Mobile Communication Devices
- HDD and SSD
- Portable GPS Device
- PDAs
- Hard Disk Drives