TPS2091DG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | OTHER |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Current - Output | 250mA |
| Quiescent Current | 85μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Min Current Limit | 300mA |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2091DG4 Overview
As part of the SOIC package, it is included.There are a total of 8 terminations on it.The terminal position of the device is DUAL.Total number of pins is 8.The supply voltage 3.3V is necessary for high efficiency.For operation, 8 pins are used.As far as Peripheral Drivers is concerned, this gadget is self-contained.The maximum operating temperature of 85°C°C allows for stable operation.At a minimum working temperature of 0°C degrees Celsius, it maintains reliability.Part 3/5V uses a power supply that has a voltage.By default, it produces output 2.Consequently, 250mA is the maximum output current that can be achieved to meet the operation criteria.There is a maximum current requirement of 85μA for it to operate.Resistance to 80mOhm is present in the device.
TPS2091DG4 Features
The terminal position of 8
TPS2091DG4 Applications
There are a lot of Texas Instruments TPS2091DG4 hot swap controllers applications.
- Datacom
- Disconnect faulty loads before supply voltage drops
- Automatic restart after load failure
- Firewire
- Base station power distribution system
- Continuous monitoring of device temperature
- Identify faulty boards
- Short-circuit protection in real time
- Temperature monitor output
- Distributed power systems