TPS2085DR
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TPS2085 |
| Pin Count | 16 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 4 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 4 |
| Min Current Limit | 700mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2085DR Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 16-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to 0°C~125°C TJ for reliable performance.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The lighting driver has Status Flag features.There is a TPS2085 family of things that it belongs to.It consists of 16 terminations in total.The 16 pins are used to operate the LED driver.The LED driving board has a total of 4 functions.Maximum output current falls to 500mA when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 3.3V.There are 16 pins in total on this board.The LED driver has 80mOhm resistance.In this case, the output current is set to 500mA.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This part has a power supply of 3/5V volts.The supply voltage should be set at 5.5V for best efficiency.As far as input voltage goes, its maximum is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.It requires a maximum current requirement of 85μA.Currently, there are 4 inputs available.
TPS2085DR Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2085DR Applications
There are a lot of Texas Instruments TPS2085DR Power Switches ICs applications.
- Wireless Modem Data Cards
- Notebook and Tablet Computers
- Set-top-box
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Smartphone and PDA
- Portable GPS
- Hot Swap
- Smart Phones, Feature Phones
- Set-Top Boxes