TPS2069CDGNR-2
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2069 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 ms |
| Switch Type | USB Switch |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 2.5 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 69m Ω |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2069CDGNR-2 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.This switch is of type USB Switch.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.This object belongs to the TPS2069 family.During operation, the 8 pins are used.The maximum output current is reduced to 1.5A to meet the operation criteria.It is positioned in the direction of Surface Mount.Currently, the LED driving board has a resistance of 70mOhm ohms.The output current is set to 1.5A in this case.In this case, the analog IC is SPST.In order to maximize efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.It has a 4.5V volt minimum input voltage.This system has a maximum current requirement of 85μA.
TPS2069CDGNR-2 Features
Resistance of 70mOhm
TPS2069CDGNR-2 Applications
There are a lot of Texas Instruments TPS2069CDGNR-2 Power Switches ICs applications.
- Portable Music Players
- Gaming
- Notebook and Tablet Computers
- Hot Swaps
- Solid State Drivers
- HDD, SSD
- HDD and SSD
- Various applications equipped with buttons
- PC Cards
- Smartphone and PDA