TPS2065DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2065 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1A |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2065DR Overview
The package is in the form of a Tape & Reel (TR).It's included in the 8-SOIC (0.154, 3.90mm Width) package.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Status Flag.As you can see, it comes from the TPS2065 family.A total of 8 terminations can be found in it.In order to operate, the 8 pins are used.As far as functions are concerned, the lighting driver has 1.With a supply voltage of 3.3V, high efficiency is possible.This LED driver is equipped with a total of 8 pins.In this case, there is 70mOhm resistance in the LED driving board.The output current is set to 1A in this case.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.It has a maximum input voltage of 5.5V volts.It requires 2.7V volts as the minimum input voltage.By using this lighting driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.A maximum supply current of 0.07mA is available for operation.
TPS2065DR Features
Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2065DR Applications
There are a lot of Texas Instruments TPS2065DR Power Switches ICs applications.
- Solid State Drivers
- Set-top-box
- USB Power Distribution
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Mobile Communication Devices
- Wearable Devices
- Various applications equipped with buttons
- HDD, SSD
- USB Protection