TPS2062CDRBT-2
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Resistance | 87mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2062 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Interface | On/Off |
| Analog IC - Other Type | SGL POLE SGL THROW SWITCH |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.4 ms |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.001mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3.25 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Switching | MAKE-BEFORE-BREAK |
| Rds On (Typ) | 73m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2062CDRBT-2 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 8-VDFN Exposed Pad package as well.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There are 2 outputs available on this lighting driver.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.There are Status Flag features available on the LED driving board.This object belongs to the TPS2062 family.The operation is performed through the 8 pins.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 87mOhm ohms.It is set to 1A in this case.In this lighting driver, SGL POLE SGL THROW SWITCH is the analog IC.It has a maximum supply current of 0.001mA.
TPS2062CDRBT-2 Features
Resistance of 87mOhm
TPS2062CDRBT-2 Applications
There are a lot of Texas Instruments TPS2062CDRBT-2 Power Switches ICs applications.
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Solid-State Drives
- Hot Swaps
- Wireless Modem Data Cards
- Smartphone and PDA
- Hot Swap
- Notebook PC
- Hard Disk Drives
- Portable GPS Device