TPS2046BDR
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2046 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
TPS2046BDR Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.It uses a supply voltage of Not Required to operate.Voltage output is N-Channel volts at maximum.In terms of features, the LED driving board has Status Flag.As you can see, it comes from the TPS2046 family.It contains 8 terminations.8 pins are used for operation.It consists of 1 functions.It is necessary to reduce the maximum output current to 250mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 3.3V.8 pins are equipped with it.It has 70mOhm resistance.In this case, the output current is set to 250mA.There is a Power Management Circuits capacity container for this LED driver that is self-contained.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.It has a power supply of 3/5V.As far as input voltage goes, its maximum is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.With this LED driver, UNDERVOLTAGE LOCKOUT can also be produced.A maximum supply current of 0.09mA is available for operation.We have available 1 inputs.
TPS2046BDR Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2046BDR Applications
There are a lot of Texas Instruments TPS2046BDR Power Switches ICs applications.
- Mobile Communication Devices
- USB3.1 Power Delivery
- HDD, SSD
- Portable Devices
- Wearable Devices
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- Solid-State Drives
- PC Cards
- Solid State Drivers