TPS2045DR
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Continuous Drain Current (ID) | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2045 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
TPS2045DR Overview
Tape & Reel (TR) is the way it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Status Flag features available on the LED driving board.This object belongs to the TPS2045 family.As a result, there are 8 terminations.In order to operate, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.It is necessary to reduce the maximum output current to 250mA to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 8 pins.Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.
TPS2045DR Features
Supplied from 3.3V
1 channels
TPS2045DR Applications
There are a lot of Texas Instruments TPS2045DR Power Switches ICs applications.
- Mobile Communication Devices
- Set-Top Boxes
- Smart Phones, Feature Phones
- Solid State Drivers
- Portable Music Players
- Wireless Modem Data Cards
- Portable GPS Device
- Wireless/Networking Cards
- Solid-State Drives
- Low Voltage I/O System Power