TPS2042D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042D Overview
As you can see, it's packaged in the way of a Tube.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the TPS2042 family.As a result, there are 8 terminations.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.It is possible to obtain high efficiency with a supply voltage of 5V.It is positioned in the direction of Surface Mount.It is equipped with a total of 8 pins.Currently, the LED driving board has 80mOhm resistance.The analog IC used in this lighting driver is ANALOG CIRCUIT.
TPS2042D Features
Supplied from 5V
Resistance of 80mOhm
TPS2042D Applications
There are a lot of Texas Instruments TPS2042D Power Switches ICs applications.
- Notebook and Tablet Computers
- USB Ports/Hubs
- Handheld Devices
- Smart Phones, Feature Phones
- Hard Disk Drives
- USB3.1 Power Delivery
- PDAs
- Various applications equipped with buttons
- Hot Swap
- USB Power Distribution