TPS2042AD
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 725mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2042 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6.3V |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 725mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 135mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2042AD Overview
As a result, it is packaged in the form of a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended to set the temperature to 0°C~125°C TJ in order to ensure reliable operation.As a default, the output is set to 2.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Status Flag features.As you can see, it comes from the TPS2042 family.There are 8 terminations in it.In order to operate, the 8 pins are used.It is important to note that the LED driving board has 1 functions.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 8 pins.It has a resistance of 80mOhm.This case has the output current set to 500mA.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.The maximum input voltage of the LED driver is 5.5V volts.It has a 2.7V volt minimum input voltage.
TPS2042AD Features
Supplied from 3.3V
Resistance of 80mOhm
2 channels
TPS2042AD Applications
There are a lot of Texas Instruments TPS2042AD Power Switches ICs applications.
- Wireless Modem Data Cards
- USB Protection
- Portable GPS
- Notebook PC
- Notebook and Tablet Computers
- Portable Music Players
- Various applications equipped with buttons
- Hot Swaps
- Hard Disk Drives
- Smartphone and PDA