TPS2041BQDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 285mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2041 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 43μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 70μA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2041BQDBVRQ1 Overview
It is packaged in the form of a Tape & Reel (TR).There is a SC-74A, SOT-753 package that includes it.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the TPS2041 family.It has a total of 5 terminations.The 5 pins are used for the operation of the system.It consists of 1 functions.High efficiency is possible at 3.3V supply voltage.It is mounted in the way of Surface Mount.A total of 5 pins are included in this LED driver.Currently, the LED driving board has 70mOhm resistance.The Automotive, AEC-Q100 series includes this electrical component.When this case is used, the output current is set to 500mA.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.For its operation, a maximum current requirement of 70μA is required.
TPS2041BQDBVRQ1 Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
TPS2041BQDBVRQ1 Applications
There are a lot of Texas Instruments TPS2041BQDBVRQ1 Power Switches ICs applications.
- Set-top-box
- Portable GPS
- Storage Drives
- Various applications equipped with buttons
- Hot Swaps
- Notebook PC
- USB Ports/Hubs
- Portable Music Players
- USB3.1 Power Delivery
- Set-Top Boxes