TPS2034PE4
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Package / Case | P |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Min Input Voltage | 2.7V |
| Output Current-Max | 2A |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Driver Number of Bits | 1 |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
TPS2034PE4 Overview
You get it with the P package.The 8 terminations total to three.This device has a terminal position of DUAL.Hot-swappable device has a total of 8 pins on Hot-swappable device.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 3.3V.8 pins are used in operation.Operating at 85°C°C ensures stable performance.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.Part 3/5V is associated with power supplies.The default setting is output 1.An output voltage of 5.5VV is its maximum.Using a low supply voltage, such as 2.7VV, will be feasible.
TPS2034PE4 Features
The terminal position of 8
TPS2034PE4 Applications
There are a lot of Texas Instruments TPS2034PE4 hot swap controllers applications.
- Solid state circuit breakers
- Thermal limitation
- Storage network
- Avionics systems
- Data communication systems
- Active current limit
- Loads
- Board or blade insertion into live backplanes
- Raid
- Industrial application