TPS2024D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 61mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2024 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Nominal Supply Current | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 33m Ω |
| Drain to Source Resistance | 33mOhm |
| Turn Off Time | 40000 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2024D Overview
It's?packaged?in?the way?of?a?Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Status Flag.There is a TPS2024 family of things that it belongs to.It contains 8 terminations.For operation, we use the 8 pins.There are 1 functions of the LED driver.It is possible to obtain high efficiency with a supply voltage of 3.3V.As a result, it is mounted in the manner of Surface Mount.In total, it has 8 pins.The LED driver has 61mOhm resistance.This results in a 2A output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 3/5V.This LED driving board can accept voltages up to 5.5V volts as an input.It has a 2.7V volt minimum input voltage.
TPS2024D Features
Supplied from 3.3V
Resistance of 61mOhm
TPS2024D Applications
There are a lot of Texas Instruments TPS2024D Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- USB Protection
- Portable Video Game Players
- Portable GPS Device
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Hot Swaps
- Wireless Headsets
- Solid State Drivers