TPS2022DRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 37mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2022 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2022DRG4Q1 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.Voltage output is N-Channel volts at maximum.Currently, the LED driving board is equipped with Status Flag features.This object belongs to the TPS2022 family.It contains 8 terminations.The 8 pins are used to operate the LED driver.It contains 1 functions.Its maximum output voltage is 1AV.Using a voltage of 3.3V allows for high efficiency.8 pins are equipped with it.37mOhm resistance is present in the lighting driver.The Automotive, AEC-Q100 series includes this electrical component.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part's power supply is 3/5V.This LED driver can handle voltages up to 5.5V volts.The minimum input voltage is 2.7V volts.
TPS2022DRG4Q1 Features
Supplied from 3.3V
Resistance of 37mOhm
TPS2022DRG4Q1 Applications
There are a lot of Texas Instruments TPS2022DRG4Q1 Power Switches ICs applications.
- Portable GPS
- Hot Swap
- Hard Disk Drives
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- HDD, SSD
- Telecom and Network Systems
- PC Card Hot Swap
- USB Power Distribution
- HDD and SSD