TPS2012DRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2012 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2012DRG4 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package includes it.The mounting type of the LED driver is Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The TPS2012 family contains this object.In total, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.Using a voltage of 3V allows for high efficiency.There are 8 pins in total on this board.In this LED driving board, there is 75mOhm resistance.This case results in a 1A output current.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.It has a maximum input voltage of 5.5V volts.It has a 2.7V volt minimum input voltage.It requires 73μA current to operate.
TPS2012DRG4 Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2012DRG4 Applications
There are a lot of Texas Instruments TPS2012DRG4 Power Switches ICs applications.
- Hot Swap
- HDD, SSD
- Handheld Devices
- Hot-Swap Systems
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Hard Disk Drives
- Storage (HDDs, SSDs)
- PDAs
- Wireless/Networking Cards