TPS2011ADR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2011 |
| Pin Count | 8 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 660mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 33m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2011ADR Overview
A Tape & Reel (TR) is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.It comes under the family of TPS2011.It consists of 8 terminations in total.8 pins are used for operation.It consists of 1 functions.The maximum output current is reduced to 600mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.A total of 8 pins are included in this LED driver.The LED driver has 30mOhm resistance.This results in a 600mA output current.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.Input voltage is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts.This system has a maximum current requirement of 73μA.We have available 1 inputs.
TPS2011ADR Features
Supplied from 3.3V
Resistance of 30mOhm
1 channels
TPS2011ADR Applications
There are a lot of Texas Instruments TPS2011ADR Power Switches ICs applications.
- Set-top-box
- HDD, SSD
- USB3.1 Power Delivery
- Wireless Headsets
- Low Voltage I/O System Power
- Telecom and Network Systems
- Smart Phones, Feature Phones
- Portable Devices
- USB Power Distribution
- Portable/Handheld Devices