TPS2003CDRCR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2003 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 75μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 3.25 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2003CDRCR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 10-VFDFN Exposed Pad.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver has 2 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Features of the lighting driver are Status Flag.The TPS2003 family contains this object.It consists of 10 terminations in total.The operation is performed through the 10 pins.It consists of 1 functions.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.In total, it has 10 pins.It has 84mOhm resistance.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.The maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 4.5V volts.
TPS2003CDRCR Features
Supplied from 5V
Resistance of 84mOhm
2 channels
TPS2003CDRCR Applications
There are a lot of Texas Instruments TPS2003CDRCR Power Switches ICs applications.
- Hard Disk Drives
- Set-Top Boxes
- Notebook and Tablet Computers
- HDD, SSD
- Solid State Drivers
- Mobile Communication Devices
- Low Voltage I/O System Power
- Portable Devices
- USB Power Distribution
- Gaming