TPA741DGN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA741 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.45mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Load Impedance | 8Ohm |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA741DGN Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is embedded.This device is packaged in the way of Tube .In addition, 8 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.The output it is configured with uses 1-Channel (Mono) .There is Class AB type of electrical device associated with this device.Computers and other communication devices feature 8 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .This electrical device has a 2.5V~5.5V supply voltage.The chip is equipped with 1 channels.During operation, the value Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Ideally, the operating temperature should not exceed -40°C~85°C TA .Amp parts is equipped wAmp partsh 8 pin count.Audio/Video Amplifiers incorporates this part.Amp parts is included in the TPA741 family.According to the manufacturer, the maximum output power of this electronic component is 700mW kWh per hour.A normal operation requires a supply voltage (Vsup) above 2.5V .5.5V represents the maximal supply voltage (Vsup).Amp parts is an electronic part wAmp partsh a supply type of Single .There is 1.45mA external influence on the consumption of quiescent current: it consumes 1.45mA of quiescent current.
TPA741DGN Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA741 family
700mW kWh per hour
TPA741DGN Applications
There are a lot of Texas Instruments TPA741DGN audio amplifiers applications.
- Fast A/D and D/A converters, video amplifiers
- Video conversion and routing
- Communication
- Comparator
- Multiplication and division circuits
- High input resistance broadband
- ECG equipment
- Fission chambers
- Semiconductor detectors
- Video and image computer boards