TPA711DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA711 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 725mW |
| Max Supply Current | 2.5mA |
| Quiescent Current | 1.25mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 4 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.3% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA711DR Overview
I have embedded this device in 8-SOIC (0.154, 3.90mm Width) .Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.1-Channel (Mono) is the output configured for it.The device belongs to the Class AB type of electrical devices.As part of the signal interface in a computer or other communication device, there are 8 pins.The electronic part is positioned in the way of Surface Mount .This electrical device is powered by 2.5V~5.5V volts.1 channels are provided by the device.Operating with Depop, Short-Circuit and Thermal Protection, Shutdown is possible.The operating temperature should not exceed -40°C~85°C TA °C.This device has 8 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is included in the TPA711 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 700mW kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 2.5V .The maximal supply voltage (Vsup) reaches 5.5V .There is a supply type of Single for this electronic part.Amp parts operates from a 3.3/5V power supply.The device consumes 1.25mA quiescent current and is unaffected by external influences.
TPA711DR Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA711 family
700mW kWh per hour
TPA711DR Applications
There are a lot of Texas Instruments TPA711DR audio amplifiers applications.
- Information processing
- Instrumentation
- Broadcasting
- Signal transformation
- High-frequency data acquisition systems
- High gain DC amplifier
- Displayers for aircraft and air transportation control systems
- Fission chambers
- Inverse/same-phase proportional circuit
- Band-stop filter