TPA711DGNR
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA711 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.25mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 4 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.3% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
TPA711DGNR Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains an embedded device.The device is in the form of Cut Tape (CT) .In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Amp parts uses 1-Channel (Mono) as Amp partss output.An electrical device of type Class AB is involved.Computers and other communication devices feature 8 pins, which are pronged contacts.Amp parts is mounted in front of Surface Mount .The supply voltage of this electrical device is 2.5V~5.5V .1 channels are provided by the device.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .Temperatures should not exceed -40°C~85°C TA .There are 8 pins on this device.As part of Audio/Video Amplifiers , this part is included.Amp parts is a member of the TPA711 family.The maximal Output Power of this electronic part is 700mW kWh per hour.A normal operation requires a supply voltage (Vsup) above 2.5V .5.5V is the maximum supply voltage (Vsup).In this electronic part, the supply type is Single .Power is supplied by a 3.3/5V volt source.The device consumes 1.25mA quiescent current
TPA711DGNR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA711 family
700mW kWh per hour
TPA711DGNR Applications
There are a lot of Texas Instruments TPA711DGNR audio amplifiers applications.
- Information processing
- Proportional counter tubes
- single/dual op amp sum and difference circuits
- Proportional operation circuits
- Instrumentation
- Radar
- High/low-pass filter circuit
- Computer workstations and wireless base stations
- High gain DC amplifier
- Oscilloscopes